Headlight range adjustment - Standard LED non matrix headlights

[Duderooner]

Hi all, I have standard LED headlights which are very good on main beam but when on dipped beam now do not appear to light the road as far in advance as they used to. I have tried the headlight range adjust setting for increased loads but it does not appear to adjust the beam up or down in any way.

Can someone else with these headlights try their dipped beam height adjustment to see what kind of difference it makes and if you hear any kind of meachnical noise externally when carrying out the change from one to another. Could it be a blown fuse that controls the motors?

Thanks Steven

[Aragorn]

Mine moves very obviously when for instance parked shining against the garage door or another car.

Someone else on here did report the same sounding fault recently, maybe you can find their thread.

[MacDragon]

There seems to be a very common fault with the non matrix lights and levelling stopping working, skoda are supposedly working on a proper fix.. but this has been long running issue and likely needs a control module swapping. It's the control module in some way not the lights themselves that is causing issue.

[rogerrally]

I also was struggling with the dipped beam lights not being very good and not having a lot of throw or distance to them. As pointed out in another thread someone was trying to survey Enyaq owners if their headlight range setting was working, mine wasn't. It was due its first service, so as well as getting the puddle lights replaced i mentioned that the lights were rubbish on dipped and didn't appear to adjust as expected. I was told that they were adjusted as per MoT standards. Nothing mentioned about the headlight levelling, but strangely they now do adjust - where they didn't prior to the service. Still not very good on dipped beam, but less bad than they were prior to the service.